10 Year Smoke and Carbon Monoxide Alarm for European Home Safety

Residential safety products are not purchased for a few months of use. They are expected to remain part of a home safety system for years.

The JKD-513COM smoke and carbon monoxide alarm is designed around a 10-year product life after manufacture, giving distributors and residential safety brands a long-term product platform rather than a short-life entry-level alarm.

The core purchasing reason for this JKD-513COM is therefore its 10-year lifecycle combined with certified smoke and CO protection.

It integrates a photoelectric smoke sensor and an electrochemical CO sensor in one housing while meeting the requirements of both EN14604:2005/AC:2008 and EN50291-1:2018.

For European importers, wholesalers and private-label brands, this creates a straightforward proposition:

10-year product life, two residential hazards and two corresponding EN standards in one alarm.

A long product lifecycle can be valuable throughout the distribution chain.

For homeowners, it provides a clearly defined replacement cycle.

For retailers, a 10 year smoke and CO alarm can be positioned above basic short-life products.

For distributors, it creates a long-term product category suitable for residential safety portfolios.

For private-label brands, the 10-year specification also provides a clear feature that can be communicated through packaging, product listings and technical documentation.

JKD-513COM is therefore suitable for buyers looking beyond the lowest initial purchase price and focusing instead on long-term residential use.

A home may face more than one type of hazard.

JKD-513COM combines:

• Smoke Alarm Function
• Carbon Monoxide Alarm Function

inside one compact product.

The two functions use different sensing technologies because smoke and CO require different detection principles.

For smoke, JKD-513COM uses a:

• Photoelectric Reflection Sensor

For carbon monoxide, it uses an:

• Electrochemical CO Sensor

This allows the product to serve as a combination smoke and CO alarm while retaining dedicated sensing technology for each hazard.

The smoke sensing system has a specified sensitivity of:

• 0.25dB/m

Photoelectric reflection technology provides the sensing basis for the smoke alarm function.

JKD-513COM also includes an approximately:

• 10-minute smoke alarm silence function

This provides practical everyday usability in residential environments.

For buyers searching for a photoelectric smoke alarm for home use, JKD-513COM combines this smoke sensing technology with carbon monoxide monitoring in the same unit.

The CO monitoring function uses an electrochemical carbon monoxide sensor and conforms to EN50291-1:2018.

The specified alarm response is:

These defined response levels give technical buyers measurable information when evaluating a residential carbon monoxide alarm.

Rather than describing the CO sensor simply as sensitive, the product provides specific response behavior at different carbon monoxide concentrations.

One of the strongest advantages of JKD-513COM for the European market is the combination of two relevant product standards.

Supports the smoke alarm function.

Supports the carbon monoxide alarm function.

This makes JKD-513COM particularly suitable for buyers searching for an EN14604 smoke alarm and EN50291 CO alarm in one combined product.

It is also supported by SGS certification, providing professional distributors with third-party certification documentation for product evaluation.

In addition to the main smoke and CO standards, JKD-513COM is supported by:

• RoHS
• EMC
• UKCA

For importers and private-label customers, this broader documentation package can support supplier qualification, internal product assessment and market preparation.

The combination of SGS, EN14604, EN50291, RoHS, EMC and UKCA is therefore an important B2B purchasing consideration.

JKD-513COM is powered by:

• 3 x 1.5V AA alkaline batteries

The replaceable battery design provides a familiar power solution for residential users.

This gives the model a different position from a sealed lithium 10 year smoke and carbon monoxide alarm.

Consumers who prefer standard replaceable batteries can retain control over the power source during the product lifecycle while benefiting from a detector platform designed for 10 years of service.

The average standby current is:

• Less than 50μA

and the average alarm current is:

• Less than 70mA.

JKD-513COM is a Type B apparatus, designed to provide visual and audible alarm indications.

The specified alarm sound level is:

• At least 85dB at 3 meters

This provides a clear warning when an applicable smoke or CO alarm condition occurs.

The product can therefore be marketed as both a home smoke alarm and a residential CO alarm, while providing the convenience of one combined unit.

JKD-513COM supports:

• Ceiling Installation
• Wall Installation

The specified detection range is:

• Maximum 40m² within a room

Its dimensions are approximately:

• Φ105 x 39mm

with a net weight of:

• 180 plus or minus 10g.

The compact format is suitable for houses, apartments, rental properties and other residential environments where combined smoke and CO monitoring is required.

For distributors, JKD-513COM can fill an important position between basic alarms and sealed-lithium models.

Its selling points are easy to communicate:

• 10 Year Product Life
• Smoke and CO in One Alarm
• EN14604 and EN50291
• SGS Certification
• Replaceable AA Battery Power

This makes the product suitable for fire safety wholesalers, electrical distributors, home improvement retailers, residential safety brands and private-label programs.

OEM and ODM support can include customized branding, product labels, retail packaging, multilingual manuals and carton customization.

JKD-513COM is supported by a complete certification and compliance package for professional buyers:

• SGS Certification
• EN14604:2005/AC:2008 Smoke Alarm Standard
• EN50291-1:2018 Carbon Monoxide Alarm Standard
• RoHS
• EMC
• UKCA

Technical datasheets, product specifications, user manuals and applicable certification documents can be provided for B2B product evaluation.

CE EN50291 Report.pdf

CE EN14604(CPR) Report.pdf

The specified product life is 10 years after manufacture.

Yes. JKD-513COM combines photoelectric smoke sensing and electrochemical CO sensing in one housing.

The smoke alarm function complies with EN14604:2005/AC:2008.

The carbon monoxide function complies with EN50291-1:2018.

Yes. The model is supported by SGS certification.

It uses 3 x 1.5V AA alkaline batteries.

The specified audible warning is at least 85dB at 3 meters.

The specified detection coverage is maximum 40m² within one room.

Yes. OEM, ODM and private-label projects are supported.